CICISCO CATALYST 3850 SERIES SWITCH WS-C3850-12S-S IP Base CISCO SWITCH
QUICK OVERVIEW
· Cisco Catalyst 3850-12 Switch
· 12 x 10/100/1000 SFP Ports
· Layer 3
· Stackable
· 350W AC Power NO POE
· IP Base
· Managed
The Cisco Catalyst 3850 Series provides capabilities that ideally suited to support the convergence of wired and wireless access.
The new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility, and application optimization.
This convergence is built on the resilience of the new and improved Cisco StackWise®-480 technology.
| Product Code | WS-C3850-12S-S |
| Description | Cisco Catalyst 3850 12 Port GE SFP IP Base |
| Feature Set | IP Base |
| Network SFP uplink module selection | C3850-NM-4-1G,C3850-NM-2-10G, |
| Ports | 12 ports of SFP Ethernet fiber connection with Flexible Netflow feature |
| Maximum stacking number | 9 |
| Stack bandwidth | 480 Gbps |
| Forwarding Performance | 68.4 Mpps |
| Switching Capacity | 68 Gbps |
| RAM | 4 G |
| Flash Memory | 2 G |
| Dimensions | 44.5 cm x 45.00 cm x 4.45 cm |
| Package Weight | 17.49 Kg |
Note:
| 1 | UID (blue beacon) | 5 | USB Type A storage port |
| 2 | Mode button | 6 | 12 ports of SFP |
| 3 | Status LEDs | 7 | Network SFP uplink module slot |
| 4 | USB mini-Type B (console) port | | |
The status LEDs include STAT (status), DUPLX (duplex), SPEED, STACK, SYST (system), ACTV (active) and
S-PWR (Stack Power).
The switch supports one hot-swappable network module that provides uplink ports to connect to other
devices. The switch should only be operated with either a network module or a blank module installed..
Note:
| 1 | Ground connector | 5 | Power supply modules |
| 2 | CONSOLE (RJ-45 console port) | 6 | Fan modules |
| 3 | StackWise port connectors | 7 | MGMT port |
| 4 | StackPower connectors | 8 | Reset Button |
Below shows the StackWise-480 and StackPower connectors.
In order to stacking with LAN base feature set, WS-C3850-12S-S needs to configure in LAN base mode from CLI.
Table shows some accessories of the WS-C3850-12S-S.
| Models | Description |
| C3850-NM-4-1G | Cisco 3850 Series 4 x 1GE Network Module |
| C3850-NM-2-10G | Cisco 3850 Series 2 x 10GE Network Module |
| L-C3850-12-S-E= | C3850-12 IP Base to IP Services Electronic RTU License |
| PWR-C1-350WAC | Cisco 3850 Series Power Supply 350W AC |
| PWR-C1-350WAC/2 | Cisco 3850 Series Secondary Power Supply 350W AC Config 1 Secondary Power Supply |
| STACK-T1-50CM= | Cisco StackWise-480 50cm stacking cable for Cisco Catalyst 3850 series switch |
| STACK-T1-1M= | Cisco StackWise-480 1m stacking cable for Cisco Catalyst 3850 series switch |
